But What Is it? Well Just Take a Lokk-See Here Folks:
Carbon Fiber Laminate Films are our thickest vinyl based film. This black carbon fiber finish, has a textured feel. The laminate is embossed with a cross hatch pattern that can be felt when touched! It is made with a two ply construction, adhesive backed and ready to apply to any gentle contoured or curved surface.
Embossed Laminate film, you can actually feel the cross carbon weave hatch texture.
Prefect color match to our Carbon Fiber Dash Kit line.
Applies similarly to decal or sticker using a wet or dry application method.
Rvinyl Film carries a 3 year warranty, designed to last up to five years.
Step by Step wrap kit application instructions available online.
Genuine Rvinyl product.
Our thickest laminate film available.
Can be heated molded to gentle contours and curves.
What Carbon Fiber Black Laminate application tools do you recommend?
Rvinyl recommends the use of an application squeegee which will reduce air bubbles during installation and aide in heat conforming Carbon Fiber Laminate Film. By using a low friction sleeve, you will reduce the chance of scratching your Carbon Fiber Black Laminate Film during application. Application solutions such as Rapid Clear will remove any dirt or debris from your application surface and Rapid Tac will aide in the wet application of our laminate Film kits. We strongly recommend the use of these products to achieve professional results.
Why don't you offer a wider laminate kit?
Do to manufacturing constraints we do not offer wider kits than 24 inches and do not offer longer kits than 48 inches. We have taken into consideration the general ability of our customers to install this product and feel that these dimensions are the largest and easiest to work with when restyling your application surface in Black Carbon Fiber Laminate Film.
What can Rvinyl Wrap Kits be applied to?
Your car's dash board, audio, gauges, audio accessories, navigation systems, amplifiers, wheels, mirrors, door handles, glass, cell phones, laptops, plastic trim, metal parts and just about any relatively non-porous surface.
Do they have a glossy finish?
No, it has a matte finish. There is some sheen, but it is not high reflective as our Carbon Fiber R Two and Carbon Fiber R Three series films.
Is the surface durable?
When applied correctly to the appropriate hard surface the film is very durable, UV stable and scratch resistant. It is by far our most durable film.
Can it be applied to curved surfaces?
Carbon Fiber Laminate Black Film can be applied to surfaces with moderate curvatures, the more extreme the curve the more difficult the application. They can be applied using a heated application method. This is an advanced installation procedure, but well worth the trouble.
Will it fade in the sun?
No, it is coated with a UV protective layer which will last up to three years outdoors.
Can it be cleaned?
Yes, once applied and bonded to your surface you may clean it and polish it with such things Armor All or any type of cleaning agent that is Acetate free.
What are the films physical properties?
Thickness of film plus adhesive: .0084" (0.021336cm)
Application temperature: 50°F to 104°F (10°C - 40°C)
Rvinyl recommends an application temperature of 70-80°F (21° -26°)
End Use temperature after application: -5°F to 194°F (-20°C - 90°C)
What is the difference between Carbon Fiber R One, Two and Three Series films?
Rvinyl R One film is our widest printed vinyl based film and designed to be applied to curved or compounded surfaces. R Two and R Three series films are foil based, have a different pattern and are designed to be applied to simple curves, but generally flatter even surfaces. Our Laminate film is 2 Ply, incredibly durable, our thickest film and one of our least flexible lines.
Embossed Laminate film, you can actually feel the cross carbon weave hatch texture. Prefect color match to our Carbon Fiber Dash Kit line. Applies similarly to decal or sticker using a wet or dry application method. Rvinyl Film carries a 3 year warranty, designed to last up to five years. Step by Step wrap kit application instructions available online. Genuine Rvinyl product. Our thickest laminate film available. Can be heated molded to gentle contours and curves.What Carbon Fiber Black Laminate application tools do you recommend?
Rvinyl recommends the use of an application squeegee which will reduce air bubbles during installation and aide in heat conforming Carbon Fiber Laminate Film. By using a low friction sleeve, you will reduce the chance of scratching your Carbon Fiber Black Laminate Film during application. Application solutions such as Rapid Clear will remove any dirt or debris from your application surface and Rapid Tac will aide in the wet application of our laminate Film kits. We strongly recommend the use of these products to achieve professional results.
Why don't you offer a wider laminate kit?
Do to manufacturing constraints we do not offer wider kits than 24 inches and do not offer longer kits than 48 inches. We have taken into consideration the general ability of our customers to install this product and feel that these dimensions are the largest and easiest to work with when restyling your application surface in Black Carbon Fiber Laminate Film.
What can Rvinyl Wrap Kits be applied to?
Your car's dash board, audio, gauges, audio accessories, navigation systems, amplifiers, wheels, mirrors, door handles, glass, cell phones, laptops, plastic trim, metal parts and just about any relatively non-porous surface.
Do they have a glossy finish?
No, it has a matte finish. There is some sheen, but it is not high reflective as our Carbon Fiber R Two and Carbon Fiber R Three series films.
Is the surface durable?
When applied correctly to the appropriate hard surface the film is very durable, UV stable and scratch resistant. It is by far our most durable film.
Can it be applied to curved surfaces?
Carbon Fiber Laminate Black Film can be applied to surfaces with moderate curvatures, the more extreme the curve the more difficult the application. They can be applied using a heated application method. This is an advanced installation procedure, but well worth the trouble.
Will it fade in the sun?
No, it is coated with a UV protective layer which will last up to three years outdoors.
Can it be cleaned?
Yes, once applied and bonded to your surface you may clean it and polish it with such things Armor All or any type of cleaning agent that is Acetate free.
What are the films physical properties?
Thickness of film plus adhesive: .0084" (0.021336cm)
Application temperature: 50°F to 104°F (10°C - 40°C)
Rvinyl recommends an application temperature of 70-80°F (21° -26°)
End Use temperature after application: -5°F to 194°F (-20°C - 90°C)
What is the difference between Carbon Fiber R One, Two and Three Series films?
Rvinyl R One film is our widest printed vinyl based film and designed to be applied to curved or compounded surfaces. R Two and R Three series films are foil based, have a different pattern and are designed to be applied to simple curves, but generally flatter even surfaces. Our Laminate film is 2 Ply, incredibly durable, our thickest film and one of our least flexible lines.
No comments:
Post a Comment